- Bahco
- Bosch
- Bosch Thermotechnology
- Drill Bits
- Mechanic Tools
- Power Tools
- Angle Grinders & Metalworking
- Benchtop Tools & Benches
- Bosch Mobility System
- Carrying Cases
- Cordless Tools
- Detector
- Diamond Technology
- Drills & Impact Drills & Screwdrivers
- Dust Extraction Systems
- Heat Guns & Glue Guns
- Heavy Duty
- High-Pressure Washers
- Measuring Technology
- New Tools
- Rotary Hammers & Demolition Hammers
- Routers
- Sanders & Planers
- Saws
- Stirrers
- System Accessories
- Others
- Building Material
- Chemical Products
- Fosroc
- Hand Tools
- Household Product
- Kitchen & Bathroom Products
- Lock and Accessories
- Machine Accessory
- Machinery
- Marking Tools
- Mechanic Tools
- Nippon Paints
- Painting Tools
- Putty & Fillers
- Safety Equipment
- Sealant & Adhesive Products
- Sika Brand
- St Guchi (Lock System)
- Stanley
- Tape Product
- Tile Cutter
- Twine & Rope
- Water Tank
- WD-40
- Yale (Lock System)
- Others
ZUSEN HARDWARE TRADING SDN BHD
Bangunan ZUSEN, 1687-1, Jalan Cheng, Tanjung Minyak, 75260 Melaka, Malaysia.
+6011-1001 8659
+606-283 8595
Bacang Branch
11-H, H/1, H/2, Jalan Tun Perak, Bacang, 75300 Melaka, Malaysia.
Paya Rumput Branch
No. 24 & 24/1, Jalan PE 35, Taman Paya Emas, Paya Rumput, 75650 Melaka, Malaysia.
V-TECH Heavy Duty Paint Remover - VT-580
VT-580 Heavy Duty Paint Remover which penetrates into successive coats of paint, vanish or enamel. It is super strong and fast reacting yet non caustic hence will not damage bared surfaces. It is highly viscous and can be applied on vertical surfaces. It also contains surfactant which improves penetration of the paint remover. It removes coating from metal, wood, plaster and glass. It can removes enamel paints, varnishes, bitumen and also soften acrylic paints and glue.
Feature :
Feature :
- Non-caustic
- Cost effective
- Super strong and fast reacting
- High viscosity
- Works on vertical surfaces
Size Available : 500ml. 1.0L, 3.5L
Directions :
1. Apply a thick coat onto the painted surfaces with a brush.
2. Leave it for 10 minutes to react with the paint.
3. Remove the softened paint with a paint stripper.
Caution : Product may splash out when removing inner cap. Use only in well ventilated areas. Do not inhale fume.
Storage : Store in a dry and cool place below 30’C
Directions :
1. Apply a thick coat onto the painted surfaces with a brush.
2. Leave it for 10 minutes to react with the paint.
3. Remove the softened paint with a paint stripper.
Caution : Product may splash out when removing inner cap. Use only in well ventilated areas. Do not inhale fume.
Storage : Store in a dry and cool place below 30’C